Epson CX4200 - Stylus Color Inkjet 설치 지침 - 페이지 4
{카테고리_이름} Epson CX4200 - Stylus Color Inkjet에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX4200 - Stylus Color Inkjet 7 페이지. Continuous ink supply system for xm prefilled version with auto reset chips
Epson CX4200 - Stylus Color Inkjet에 대해서도 마찬가지입니다: 빠른 매뉴얼 (48 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 기술 요약 (6 페이지), 사용자 설명서 (18 페이지), 업데이트 (1 페이지)
페이지 인쇄
Step 4.
4、
1)Remove old cartridges in the printer (Pic A);
2) Insert the CIS cartridges into the cartridge car (Pic B); Make sure the
cartridges installed well.(Pic.C)
A
Step 5, Fix Supporting Arm:
5、
1) Tear off the sticker(Pic A); Measure 2.6cm from the edge of the printer, Attach
supporting arm on the printer as Picture B show;
2) The right position like Picture C shown
3) Tear off the sticker of small tube clamp;Attach it at the 4cm away from the
edge of the Printer. As picture F shown.
Rip the label
Step 6. Install the tubing.
6、
Put the tube into the Support Arm and Small Tube clamp as the below picture
shown.
Clamp the tube on the support arm
B
Stick the Support arm at 3cm distance
from the left side, and at 4 cm distance
from the upside of the printer
Get other manuals https://www.bkmanuals.com
C
as the position show on
the above picture.
Finish