Digitus DA-70155-1 사용자 설명서 - 페이지 13

{카테고리_이름} Digitus DA-70155-1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitus DA-70155-1 14 페이지. Usb to serial converter

5. To make sure that your computer can use the device correctly, you have to check

the Apple System Profiler-Device and Volumes. It will show the USB Device.

C. Linux Driver

I am believed that you already have PL-2303X/H Linux driver source, and you also know

how to compile it in Linux, so I only explain how to link device with our driver.

In Makefile file, we had set a command to insert driver into Kernel, so you can type "make

inst" to insert driver, after that, please type "dmesg" command then click enter, you will see

messages appeared on screen, please force on the least line of message," usbserial.c"

The Prolific USB Serial Adapter converter now attached to ttyUSB0 (orusb/tts/0 for devfs).

It means the virtue COM port is in ttyUSB0, so if you want to use this port, you need to use

"ln" command to hard link with device, for example: we are use PL-2303X/H to connect

with modem (or ttyS0), so we need to type "ln -b /dev/ttyUSB0 /dev/ttyS0" then click enter,

if nothing happen and the screen appear "[root@localhost / xxxxx]#", then link operation is

successfully, next, you need to execute StartProgramsSystemInternet configuration

wizard to setup modem and it port,

1. On "Select Device Type" dialog box, please chose "Modem Connection", please ignore

the "can't not find modem" message and then click next, on this dialog box, and on

"Modem Device" item to selects "/dev/ttyS0", click next.

2. On "Selection Provider" dialog box, please fill in the dial number, account and

password.

3. Click "Finish" button to the next step.

4. On the next dialog box, all setting information are in this box, please make sure all the

setting as you want.

5. Click "Apply" and "Close" to leave setup wizard.

6. To execute StartAppletsNetworkModem Lights, a small icon will appear on the

left-bottom of panel bar, when you want you connect internet, you can click the green

light to do dial-up, after that, you can launch internet application program to browser

internet.

7. To click Red light to disconnect dial-up.