Epson CX4450 제품 정보 - 페이지 8
{카테고리_이름} Epson CX4450에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX4450 13 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson CX4450에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 매뉴얼 (36 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 업데이트 (1 페이지)
페이지 인쇄
Epson Stylus CX4400 Series
Replacing Ink Cartridges
❏ When the red B ink light flashes, one or more ink cartridges
are low on ink.
❏ When the red B ink light stays on, you need to replace the
cartridge(s).
You'll also see a message on your screen when you print telling
you which cartridge is low or expended. (You cannot print
when a cartridge is expended, even if the other cartridges are
not expended.)
When a cartridge is more than six months old, print quality
may decline. If necessary, try cleaning the print head. If
printouts still do not look their best, you may need to replace
the cartridge.
Checking Cartridge Status
To check cartridge status, do one of the following:
❏ Windows: Double-click the
lower right corner of your screen).
You may also see a message asking whether you want to
receive ink offers or updates. Click
continue.
8
icon on your taskbar (in the
or
to
Accept
Decline
❏ Macintosh OS X: Open the
EPSON Printer Utility 2
printer list, click
OK
Removing and Installing Ink Cartridges
Make sure you have a new ink cartridge before you begin.
Once you start replacing a cartridge, you must complete all
the steps in one session.
Warning:
Keep ink cartridges out of the reach of children.
If ink gets on your skin, wash it off with soap and water. If it gets in
your eyes, flush them immediately with water.
Do not put your hand inside the CX4400 Series or touch any
cartridges during printing.
Caution:
Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
Install a new ink cartridge immediately after removing an expended
one. Leaving cartridges uninstalled can dehydrate the print head
and may prevent the CX4400 Series from printing.
Leave the expended cartridge installed until you have obtained a
replacement, or the ink remaining in the print head nozzles may dry
out. To ensure good results, use genuine Epson ink cartridges and
do not refill them. Other products may cause damage to your
CX4400 Series not covered by Epson's warranty.
If you remove an ink cartridge for later use, protect the ink supply
area from dirt and dust and store it in the same environment as the
CX4400 Series. Note that there is a valve in the ink supply port,
making covers or plugs unnecessary, but care is needed to prevent
the ink from staining items that the cartridge touches. Do not touch
the ink cartridge ink supply port or surrounding area.
If you remove a low or expended ink cartridge, you cannot reinstall
and use the cartridge.
5/07
folder and select
Applications
. Select
CX4400 Series
, and select
EPSON Status Monitor
in the
.