Cisco Firepower 2120 배포 매뉴얼 - 페이지 2

{카테고리_이름} Cisco Firepower 2120에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Firepower 2120 8 페이지. Rack-mount and ground the chassis
Cisco Firepower 2120에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 시작하기 (42 페이지)

페이지 인쇄

Connect a New Cisco Firepower Firewall to Your Network

To make sure the Firepower model has the right software installed, look on the cardboard box the device

came in. It should have a plain white sticker on it with a product identifier that looks similar to one in the

following table:

Firepower Model Numbers that Support Low-Touch

Provisioning

Firepower 1000 series device models:

1010, 1120, 1140, 1150

Firepower 2100 series device models:

2110, 2120, 2130, 2140

2. Before you rack the device or throw the cardboard box away, record your device's serial number and send

it to your IT department. They will need it to manage the device. The serial number of the device is located

on the cardboard box the device came in and on a sticker affixed to the device itself. See

Device's Serial Number, on page 4

3. Unpack the box and take inventory of the contents.

Keep the cardboard box until you have plugged in the device, you have connected it to your network, and

the device has successfully contacted the Cisco cloud.

4. Connect the device to power.

5. Connect the network cable from the Ethernet 1/1 interface to your wide area network (WAN) modem.

Your WAN modem is your branch's connection to the internet and will be your Firepower firewall's route

to the Internet as well.

Note

Do not connect the network cable from the device's Management interface to your WAN.

Figure 1: Firepower 1010 Cabling

Firepower Easy Deployment Guide for Cisco Firepower 1000 or 2100 Firewalls

for more information.

FTD 6.7 Product Identifiers

SF-F1K-TD6.7-K9

SF-F2K-TD6.7-K9

Find Your