Cisco Firepower 2130 시작하기

{카테고리_이름} Cisco Firepower 2130에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Firepower 2130 42 페이지. Rack-mount and ground the chassis
Cisco Firepower 2130에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 배포 매뉴얼 (8 페이지), 설치 및 유지 관리 (26 페이지)

페이지 인쇄
Cisco Firepower 2130 시작하기
Getting Started
The following topics explain how to get started configuring the Firepower Threat Defense (FTD) .
•
•
•
•
•
Is This Guide for You?
This guide explains how to configure Firepower Threat Defense using the Firepower Device Manager (FDM)
web-based configuration interface included on the Firepower Threat Defense devices.
The FDM lets you configure the basic features of the software that are most commonly used for small or
mid-size networks. It is especially designed for networks that include a single device or just a few, where you
do not want to use a high-powered multiple-device manager to control a large network containing many
Firepower Threat Defense devices.
If you are managing large numbers of devices, or if you want to use the more complex features and
configurations that Firepower Threat Defense allows, use the Firepower Management Center (FMC) to
configure your devices instead of the integrated FDM.
You can use the FDM on the following devices.
Table 1: FDM Supported Models
Device Model
Firepower 1010, 1120, 1140
Firepower 1150
Firepower 2110, 2120, 2130, 2140
Secure Firewall 3110, 3120, 3130, 3140
Firepower 4110, 4115, 4120, 4125, 4140, 4145, 4150
Firepower 4112
Is This Guide for You?, on page 1
New Features in FDM/FTD Version 7.1.0, on page 2
Logging Into the System, on page 7
Setting Up the System, on page 11
Configuration Basics, on page 32
Minimum FTD Software Version
6.4
6.5
6.2.1
7.1
6.5
6.6
Getting Started
1