Epson CX5400 - Stylus Color Inkjet 빠른 참조 매뉴얼 - 페이지 30

{카테고리_이름} Epson CX5400 - Stylus Color Inkjet에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX5400 - Stylus Color Inkjet 40 페이지. Product support bulletin(s)
Epson CX5400 - Stylus Color Inkjet에 대해서도 마찬가지입니다: 제품 정보 시트 (4 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 매뉴얼 (11 페이지), 소프트웨어 설치 (8 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 업데이트 (1 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (17 페이지), 제품 지원 게시판 (18 페이지)

Make sure your original is positioned in the top left corner of the glass, with

the short edge at the left.

Make sure you select the Copy mode you want: Standard Margins, Small

Margins, or BorderFree. See page 11 for instructions.

If you select

Auto Fit Page

the original size may not be recognized correctly. Select

Enlarge setting and use the Zoom In/Out setting to adjust the size of your

copy.

The scanner's fluorescent lamp isn't on.

The lamp turns off automatically to save power (sleep mode). The lamp comes

on when you start scanning.

Make sure the Stylus CX is plugged into a power outlet and turned on.

Paper Feeding Problems

Paper doesn't feed correctly or jams in the printer.

If paper doesn't feed, remove it from the sheet feeder. Fan the paper, load it

against the right side, and slide the left edge guide against the paper (but not

too tightly).

If paper jams, follow these steps:

1. Press the

2. Lift up the scanner and remove any paper that's inside, including any small

pieces that may have torn off.

Caution: Clear paper jams by pulling the paper out towards the front of the Stylus

CX. Never pull the paper out in the direction of the sheet feeder.

3. Turn the Stylus CX back on and reload the paper. Make sure the edges of

the paper are not creased or folded.

4. Press the left

5. Press the x

to copy a document with white or very light edges,

button to turn off the Stylus CX.

button until you see

button to continue.

Color Copy

Load/Eject

as the Reduce/

100%

on the LCD screen.