Cisco MC1500 사용 설명서
{카테고리_이름} Cisco MC1500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MC1500 20 페이지. Firepower management center
Cisco MC1500에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (42 페이지)
페이지 인쇄
Memory Upgrade Instructions for Firepower
Management Centers
This section describes how to replace the memory modules that are located internally within your Cisco
Firepower Management Center. You need to remove the cover from the appliance to replace these items.
The document contains the following sections:
•
•
•
•
•
•
•
•
Memory Upgrade Overview
As additional software feature enhancements are introduced the minimum memory requirements are
changing for the Firepower Management Centers MC750 (Rev. 1 or Rev. 2), MC1500, and MC3500
models. Appliances that do not meet the minimum memory requirement are not supported.
Table A-1
Table A-1
Management Center
Model
MC750 (Rev. 1)
MC750 (Rev. 2)
MC1500
MC3500
Memory Upgrade Overview, page A-1
Working in an ESD Environment, page A-2
Safety Warnings, page A-2
Removing The Chassis Cover, page A-3
Removing The Processor Air Duct, page A-6
Replacing the DIMMs, page A-9
Installing The Processor Air Duct, page A-14
Installing The Chassis Cover, page A-18
outlines the RAM upgrade requirements.
Overview of RAM Upgrade Requirements
Default Shipping RAM
(prior to December 2014)
4GB (1 4GB module)
4GB (1 4GB module)
12 GB (3 x 4GB modules)
12 GB (3 x 4GB modules)
Cisco Firepower Management Center 750, 1500, 2000, 3500, and 4000 Hardware Installation Guide
A P P E N D I X
DIMM
New RAM Requirements
Locations
(after December 2014)
A1
8GB (2 4GB modules)
A1
8GB (2 4GB modules)
A1, B1, and C1
48 GB (3 x 16GB modules)
A1, B1, and C1
48 GB (3 x 16GB modules)
A
A-1