Epson CX9475Fax - Stylus Color Inkjet 여기에서 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Epson CX9475Fax - Stylus Color Inkjet에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX9475Fax - Stylus Color Inkjet 24 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson CX9475Fax - Stylus Color Inkjet에 대해서도 마찬가지입니다: 매뉴얼 (17 페이지), 사양 (2 페이지), 보충 설명서 (2 페이지), 업데이트 (1 페이지)

페이지 인쇄

Epson CX9475Fax - Stylus Color Inkjet 여기에서 시작하기 매뉴얼

Installing Software and Connecting the Print

Server

You need to install the drivers and other software for the all-in-one and print

server. Follow the on-screen instructions to connect and power on the print server.

Note:

ABBY

Fine Reader Sprint is not included with the Epson Stylus CX9475Fax.

1. Insert the CX9475Fax software installation CD.

With Windows Vista, if you see the AutoPlay window, click

Run Epsetup.exe

click

Continue

2. Click

Install

3. Select

Install driver for network connection

Note:

If you want to install your all-in-one on a single computer using a USB cable, select

Install driver for USB. Follow the on-screen instructions. When installation is

complete, you're ready to print.

4. Select the correct option for setting up your all-in-one for the first time, or

for an additional computer. Then click

instructions.

5. Follow the on-screen instructions to plug the included USB cable into the

print server and your all-in-one. Then click

6. Plug one end of the included Ethernet cable into any available port on your

network access point or router. Then plug the other end into the Ethernet

port on the print server and click

7. Plug the print server power adapter into the print server and an electrical

outlet. Then click

8. Make sure your all-in-one is plugged in and turned on. Then click

The print server software is installed.

Follow the instructions in one of these sections to configure the print server:

■

Configuring for Easy Installation: If you want to use the all-in-one on a

wireless network using standard settings

■

Configuring for Advanced Installation: If you want to configure the IP

address manually or use the print server in a wired network environment

Install Software and Set Up the Print Server

. When you see the User Account Control screen,

and follow the on-screen instructions.

and click

and follow the on-screen