Argos 700-3024 조립 지침
{카테고리_이름} Argos 700-3024에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos 700-3024 2 페이지. Shelving
페이지 인쇄Shelving Assembly Instructions
Assembly & User Instructions - Please keep for future reference
IMPORTANT SAFETY WARNINGS
• Please read the instructions before assembly.
• 2 people are recommended for assembly.
• BE CAREFUL of sharp edges when assembling.
• DO NOT stand on this product or use as a ladder.
• DO NOT alter this product in any manner that is
not intended. This may cause product damage or
personal injury.
• Position the product on a level surface.
• The maximum loaded weight for each shelf is no
more than 175kg. Evenly distributed.
• When loading shelves, place heavier items on the
lower shelves, distributing the load evenly.
• Fasten the unit to the wall whenever possible with
proper fasteners (not furnished).
• Check the suitability of the wall type and to check
that the fastening devices will be able to withstand
the forces generated. Consult a competent person if
in doubt.
Important
MAX. Load per Shelf: 175kg
MAX. Load for whole unit: 875kg
Shelf Dimensions: 183H x 91.5W x 45.8D cm
Componentseference
700-3024
Tools Required:
A Mallet (not included)
PARTS LIST
A. Posts (8)
B. Shelves (5)
C. Long Apron (10)
D. Short Apron (10)
Important:
Be sure to line up and match
hole pattern on all posts prior to
assembly.
• Place post upright, using cardboard
or other safeguard beneath post to
protect floor.
• Insert tabs on long shelf support
apron into slots on post.
• Press on tabs with fingers to guide
into slots.
• Push down or gently tap apron
corner with rubber mallet to extend
tabs through slots.
• It is recommended that the bottom
shelf aprons be placed in the second
and third slots from the bottom.
• To ensure stability of the vertical unit,
do not place bottom shelf aprons any
higher than the sixth slot.
Next, insert tabs of a short
apron into the front post,
creating a "tripod." Then
alternate insertion of support
aprons with posts.