Epson DS-560 네트워크 매뉴얼 - 페이지 12

{카테고리_이름} Epson DS-560에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson DS-560 33 페이지. Epson connect technology
Epson DS-560에 대해서도 마찬가지입니다: 범위 매뉴얼 (7 페이지), 여기에서 시작 (2 페이지), 설정 매뉴얼 (4 페이지)

페이지 인쇄

DS-560

Network Guide

Using EpsonNet Config

You can use EpsonNet Config to connect the product to a Wi-Fi network using infrastructure mode.

Connect the product to your computer using a direct Wi-Fi connection to register the infrastructure network settings

on the scanner. Next, reboot the scanner in infrastructure connection mode to connect it to your infrastructure

network.

Note:

If you are using iOS or Android devices, you can use Epson DocumentScan to connect the product using infrastructure mode.

See the following section for more information on Epson DocumentScan.

"Smartphone or tablet" on page 7

Check the following settings before you start.

❏ EpsonNet Config is installed on your computer.

If it is not installed, install it from the software disc or download it from the following web site.

http://support.epson.net/setupnavi/

❏ The product and your computer are turned on and connected with a direct Wi-Fi connection.

"Direct Wi-Fi Connection" on page 16

Start EpsonNet Config on your computer.

Windows 8.1/Windows 8:

Start screen > Apps > EpsonNet > EpsonNet Config

Windows 7/Windows Vista/Windows XP:

Start > All Programs or Programs > EpsonNet > EpsonNet Config VX* > EpsonNet Config

Mac OS X:

Select Applications > Epson Software > EpsonNet > EpsonNet Config VX* > EpsonNet Config.

* Where "X" is the software version.

Using Product via Network