Cisco S195 하드웨어 설치 매뉴얼 - 페이지 19

{카테고리_이름} Cisco S195에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco S195 50 페이지. Web security appliance
Cisco S195에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (18 페이지), 매뉴얼 (24 페이지)

페이지 인쇄
Cisco S195 하드웨어 설치 매뉴얼
Overview
7
9
11
13
15

Rear Panel LEDs

The following figure shows the rear panel LEDs of the WSA S195 and describes their states. The S395 is the
same except it has two power supplies. The S695 and S695F have the same LEDs except that these models
have more data interfaces; the speed and status LED descriptions are the same.
Figure 13: S195 and S395 Rear Panel LEDs and Their States
1
3
Threaded holes for dual-hole grounding lug
Use is optional. The supported AC power supplies
have internal grounding, so no additional chassis
grounding is required.
Management interface 1 (MGMT 1)
Restricted to management use only
USB 3.0 Type A (USB 2)
Data interface (DATA 2)
Serial console port (
RJ-45 connector that directly connects a
management computer to the appliance.
Interface link speed:
• Off—Link speed is 100 Mbps.
• Amber—Link speed is 1 Gbps.
• Green—Link speed is 10 Gbps.
Data interface link speed:
• Off—Link speed is 10 Mbps.
• Amber—Link speed is 100 Mbps.
• Green—Link speed is 1 Gbps.
Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide
8
Management interface 2 (MGMT 2)
Not supported
10
USB 3.0 Type A (USB 1)
12
Data interface (DATA 1)
RPC port (RPC)
14
Use for remote power cycling.
16
Unit identification button
2
Interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
4
Data interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
Rear Panel LEDs
15