Cisco SNS 3595 설치 매뉴얼 - 페이지 20

{카테고리_이름} Cisco SNS 3595에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SNS 3595 36 페이지.

Install the Side Rails

Warning

Warning: To prevent bodily injury when mounting or servicing this unit in a rack, you must take special

precautions to ensure that the system remains stable. The following guidelines are provided to ensure your

safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the rack. When mounting this

unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the

bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in

the rack.

Statement 1006

Step 1

Attach the inner rails to the sides of the server:

Figure 5: Attach Inner Rail to Side of Server

Front side of the server

a) Align an inner rail with one side of the server so that the three keyed slots in the rail align with the three pegs on the

side of the server (see the figure above).

b) Set the keyed slots over the pegs, and then slide the rail toward the front to lock it in place on the pegs. The front slot

has a metal clip that locks over the front peg.

c) Install the second inner rail to the opposite side of the server.

Step 2

Open the front securing plate on both slide-rail assemblies. The front end of the slide-rail assembly has a spring-loaded

securing plate that must be open before you can insert the mounting pegs into the rack-post holes.

On the outside of the assembly, push the green arrow button toward the rear to open the securing plate.

Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide

Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware Appliances

Locking clip on inner rail