Cisco SNS-3400 Series 소프트웨어 설치 - 페이지 7

{카테고리_이름} Cisco SNS-3400 Series에 대한 소프트웨어 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SNS-3400 Series 38 페이지.
Cisco SNS-3400 Series에 대해서도 마찬가지입니다: 유지 관리 매뉴얼 (6 페이지)

페이지 인쇄
Cisco SNS-3400 Series 소프트웨어 설치
Install Cisco ISE Software on Cisco SNS Appliances
LED Name
Power supply status
Internal Diagnostic LEDs
The server has internal fault LEDs for CPUs, DIMMs, fan modules, SD cards, the RTC battery, and the mLOM
card. These LEDs are available only when the server is in standby power mode. An LED lights amber to
indicate a faulty component.
Note
Power must be connected to the server for these LEDs to be operate.
The following figure shows the locations of these internal LEDs in Cisco SNS-3515 or Cisco SNS-3595
appliance.
State
AC power supplies:
• Off—No AC input (12 V main power off, 12 V
standby power off).
• Green, blinking—12 V main power off; 12 V
standby power on.
• Green, solid—12 V main power on; 12 V standby
power on.
• Amber, blinking—Warning detected but 12 V
main power on.
• Amber, solid—Critical error detected; 12 V main
power off.
Install Cisco ISE Software on Cisco SNS Appliances
Internal Diagnostic LEDs
7