Cisco SNS-3415 series 설치 매뉴얼 - 페이지 2

{카테고리_이름} Cisco SNS-3415 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SNS-3415 series 19 페이지. Sns-3400 series
Cisco SNS-3415 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 문제 해결 매뉴얼 (8 페이지)

페이지 인쇄
Cisco SNS-3415 series 설치 매뉴얼
Installing the Cisco SNS-3415/3495 Appliance Rack
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
Statement 1006
To install the slide rails and the server into a rack, follow these steps:
Open the front securing latch (see
Step 1
a spring-loaded securing latch that must be open before you can insert the mounting pegs into the
rack-post holes.
On the rear side of the securing-latch assembly, hold open the clip marked "PULL."
a.
Slide the spring-loaded securing latch away from the mounting pegs.
b.
c.
Release the clip marked "PULL" to lock the securing latch in the open position.
Figure 8-1
1
2
1
2
Installation and Upgrade Guide for Cisco Secure Access Control System 5.6
8-2
Front Securing Latch
Clip marked "PULL" on rear of
assembly
Front mounting pegs
Chapter 8
Installing the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances
Figure
8-1). The end of the slide-rail assembly marked "FRONT" has
3
3
Spring-loaded securing latch on front of
assembly