Cisco SNS-3595-K9 소프트웨어 설치 - 페이지 38

{카테고리_이름} Cisco SNS-3595-K9에 대한 소프트웨어 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SNS-3595-K9 38 페이지.
Cisco SNS-3595-K9에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지)

Reimage ISE on the Cisco SNS 3500 Series Appliance

Note

The SNS 3515 and SNS 3595 appliances support the Unified Extensible Firmware Interface (UEFI) secure

boot feature. This feature ensures that only a Cisco-signed ISE image can be installed on the SNS 3515 and

SNS 3595 appliances, and prevents installation of any unsigned operating system even with physical access

to the device. For example, generic operating systems, such as Red Hat Enterprise Linux or Microsoft Windows

cannot boot on this appliance.

The SNS 3515 and SNS 3595 appliances support only Cisco ISE 2.0.1 or later releases. You cannot install a

release earlier than 2.0.1 on the SNS 3515 or SNS 3595 appliance.

Use one of the following methods to upgrade Cisco ISE:

• Use the Cisco Integrated Management Controller (CIMC) interface to map the installation .iso file to the

virtual DVD device. See

CIMC, on page

• Create an install DVD with the installation .iso file and plug in a USB external DVD drive and boot the

appliance from the DVD drive.

• Create a bootable USB device using the installation .iso file and boot the appliance from the USB drive.

See

Install Cisco ISE Software on Cisco SNS Appliances

Install ISE 2.0.1 on the Cisco SNS 3515 or 3595 Appliance Remotely Using

29.

Install ISE 2.0.1 on the Cisco 3500 Appliance Using the USB Drive, on page

Install Cisco ISE Software on Cisco SNS Appliances

30.