Epson ES-1200C Pro PC 시작하기 매뉴얼 - 페이지 9
{카테고리_이름} Epson ES-1200C Pro PC에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ES-1200C Pro PC 31 페이지. Product support bulletin(s)
Epson ES-1200C Pro PC에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 제품 지원 게시판 (19 페이지), 매뉴얼 (11 페이지), 시작하기 (17 페이지), 제품 지원 게시판 (5 페이지)
페이지 인쇄
Connecting the Scanner to the Computer
Use this procedure to connect the scanner directly to the SCSI
port on your computer using the cable included in the scanner
package.
If you are already using the SCSI port on your computer for
another SCSI device, such as an external hard drive, see
Chapter 1 of the ES-1200C User's Guide for information on
including the scanner in a daisy-chain arrangement.
Caution:
Be sure that your
devices are turned off before you plug in the cables.
1. Connect the 50-pin end of the cable to either the top or
bottom SCSI connector of the scanner; then fasten the
connector with the clamps on the sides of the connector, as
shown.
2. Plug the other end of
of the SCSI interface card you installed in the computer.
Fasten the connector with the wire clamps.
scanner, and any other peripheral
computer,
interface cable into the connector
the