finder 12.71 사용 설명서 - 페이지 2
{카테고리_이름} finder 12.71에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. finder 12.71 14 페이지.
페이지 인쇄
Instruction Manual
GB
Time switch
3. Menu overview
5. Key function
1. To access the Enter-mode (program, adjustments, options) from the automatic-mode.
2. To revert to the beginning of the current (sub-) menu.
1. To adjust the flashing digit.
2. To scroll through a choice
1. Automatic-mode: To switch the channel ON or OFF until the next programming step occurs.
2. Automatic-mode: A push longer than 3 sec. = Permanent switching status (7).
1. To activate the time switch when operated without power supply.
2. To confirm the selection or the entered data.
8. New Program (See also the example (9))
Step A. to C. please refer to point 9. (Example "New Program")
10. Pulse
Program -> New program -> Channel A -> ...
The pulse function provides you the opportunity of programming a switching time with a defined duration.
As soon as the pulse-duration has expired the time switch switches OFF automatically (the duration of the pulse is up to 59:59 mm:ss).
The programming is carried out like a standard switching time (see point 8 / 9) with following differences
Choose
function (9F).
Pulse
Define the duration of the pulse (
pulstime minute
Program the days of the week
Program the switching time (
/
time hour
time minute
Validation: Confirm the blinking summary of the pulse program
12. Additional adjustments
Menu
Main menu Application
Program
To query the programming steps and remaining memory locations
Program query
Copy from one channel to another. Memory of the channel won't
be overwritten; the copied switching steps appear additionally.
Program
Program copy
Permanent by date function is not copied!
!
Deletion of switching time(s). The program for all channels, single
Program
channels and single programming steps within on channel can be
Program delete
deleted.
Within Program modify each single switching time can be
Program
Program modify
modified.
Adjustment
Adjustment of date and time
Date-Time
Adjustment of the daylight saving time mode (ON/OFF)
Adjustment
Summertime
Choice of languages
Adjustment
Language
Displays the hour counter and pulse counter for each channel and
Options
Counter
the time switch itself.
The time switch can be locked with a 4-digit PIN-Code. The code
Options
can be adjusted, activated and deactivated. If you have forgotten
PIN-Code
the Code please call customer service.
Press all front keys for 2 seconds. The time switch is reset. The values for date
Reset-Function
and time will be deleted and have to be re-entered. The switching program has
not been deleted!
Connection diagram
1. Safety instructions
The installation and assembly of electrical equipment must be only
!
carried out only by a skilled Person! Otherwise fire danger or danger of
an electric shock exists!
Connect the supply voltage/frequency as stated on the product label!
!
Warranty void if housing opened by unauthorised person!
!
The electronic circuit is protected against a wide range of external
!
influences. Incorrect operating may occur if external influences exceed
certain limits!
/
).
pulstime second
)
4. Symbol legend
Channel is switched ON
Channel is switched OFF
For the current date the "holiday program" / "permanent by date" is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next programming step.
Current state is based on a manual over-ride. The state is permanent until terminated manually (7).
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
I
Current state is based on a switching time with pulse function
The time switch is locked; to unlock the device the PIN has to be entered (12).
6. Handling advice
The time switch is programmable without external power supply after
pressing the
-button.
To revert one step or one level back while in the Enter-Mode press
After completion of a (sub-) menu confirming
end
into the automatic-mode.
With
the choice changes from
to
end
continue
the time switch returns to the beginning of the current
continue
(sub-) menu.
When confirming
before completion, the time switch returns to the
end
automatic-mode without saving the entered data.
9. Example „New Program" (For a regular switching time)
A. If power supply is disconnected press
B. Press
, the time switch is now in the Enter-Mode.
C. Confirm
Program
D. Confirm
new program
E. Choose the desired channel with
F. For regular switching times choose
G. Within this level you activate the days of the week (1...7) on which the switching time should happen. With
you activate "yes" or deactivate "no" the corresponding date. Confirm each day with
H. Adjustment of the time: Hours
I. Verify the entered switching time: If the flashing summary of the programming step is correct, verify
off with
. After verification you have the choice between
J. If you want to proceed with programming, confirm
To leave the programming menu confirm
11. Program permanent
Program -> new program -> channel A -> permanent ->
One permanent by date programming step (holiday function) for each channel is possible. During the
desired period (The function is valid for the whole days) the channel can be switched off (
) or on (
off
permanent on
The programming of this function is as described in (8 / 9).
The choice
permanent
The switching time can be modified and deleted within
respectively.
2. Initial operation
The time switch is delivered in sleep-mode, the display is switched off.
Press
-button for 1 second.
The current date and time is already programmed and European daylight
savings time is activated.
Select the desired language by pressing
pressing
. (Remark: By pressing
current position)
If required, date, time and daylight savings time mode can be adjusted also by
pressing
-buttons and a subsequent confirmation with
7. Channel ON OFF / Permanent P
Channel
ON OFF
By pushing
-button a manual switch of the channels take place.
.
The resulting switching status is marked with the hand-symbol and
will return the device
remains until the next programming step occurs. (temporary over-
ride)
. By confirming
Permanent switching status P
By pressing the corresponding channel button
sec. the channel is permanently switched ON or OFF. The status
remains until the next manual switching occurs (> 3 sec.).
(permanent over-ride)
for one second. The display appears in Automatic-Mode.
with
.
with
.
and confirm with
.
or
with
-buttons and confirm with
on
off
and
. Minutes
and
.
edit/delete
next switching
.
end
...
).
will not be offered anymore within the menu
Program modify
BA SC08WEEK FINDER_12.71;DE,GB,FR,IT -22750- 2009.11-V01
12.71
-buttons and confirm it by
you move one step backwards from the
.
for more than 3
.
.
or
on
and
with
.
end
with
.
permanent
when already in use.
new program
and
Program delete