Cisco UCS 5108 사양 시트 - 페이지 42

{카테고리_이름} Cisco UCS 5108에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS 5108 50 페이지. Fnic tunables feature
Cisco UCS 5108에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지)

SUPPLEMENTAL MATERIAL

Optical SFP+ Transceivers

If distances greater than 5 meters (16.4 feet) must be spanned, the Fabric Extender supports the

substitution of the copper SFP+ by optical SFP+ transceivers. The SFP+ 10-Gb Ethernet optical transceiver is

a bidirectional device with a transmitter and receiver in the same physical package, as shown in

It has a duplex LC connector on the optical interface. A fiber optic cable must be used to connect the two

transceivers together.

Figure 26

SFP+ Optical Transceiver

Table 21 SFP+ Callouts

Callout

You can order two kinds of Fabric Extender bundles:

UCS-IOM2208-16FET. This bundle includes one 2208XP Fabric Extender plus 16 Fabric Extender

■

Transceivers (FETs). 8 FETs are used for the Fabric Extender and 8 for the Fabric Interconnect.

UCS-IOM2204-8FET. This bundle includes one 2204XP Fabric Extender plus 8 Fabric Extender

■

Transceivers (FETs). 4 FETs are used for the Fabric Extender and 4 for the Fabric Interconnect.

The FETs are in an SFP+ form-factor and support 10 Gbps full-duplex transmissions between the Fabric

Extender and Fabric Interconnect, using your own multimode fiber (MMF) optical cables. The reach is 25

meters using OM2 MMF optical cables and 100 meters using OM3 MMF optical cables.

If you do not order the bundle that includes the transceivers, you can order the transceivers separately as

spares (PID = FET-10G=).

Description

Dust plug

Bail clasp with clasp tab

Transmit bore

Receive bore

Figure

Cisco UCS 5108 Blade Server Chassis

26.