Cisco UCS 6500 Series 설치 준비
{카테고리_이름} Cisco UCS 6500 Series에 대한 설치 준비을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS 6500 Series 6 페이지.
페이지 인쇄
Preparing for Installation
This chapter contains the following topics:
•
•
•
•
•
•
•
•
•
•
•
Temperature Requirements
The fabric interconnect requires an operating temperature of 32 to 104 degrees Fahrenheit (0 to 40 degrees
Celsius). If the fabric interconnect is not operating, the temperature must be between -40 to 158 degrees
Fahrenheit (-40 to 70 degrees Celsius).
Humidity Requirements
Buildings in which the climate is controlled by air-conditioning in the warmer months and by heat during the
colder months usually maintain an acceptable level of humidity for the fabric interconnect equipment. However,
if the fabric interconnect is located in an unusually humid location, use a dehumidifier to maintain the humidity
within an acceptable range.
Altitude Requirements
Altitude rating is based on power supply installed; see critical components list in the system CB report for
altitude rating.
Temperature Requirements, on page 1
Humidity Requirements, on page 1
Altitude Requirements, on page 1
Dust and Particulate Requirements, on page 2
Shock and Vibration Requirements, on page 3
Grounding Requirements, on page 3
Planning for Power Requirements, on page 3
Airflow Requirements, on page 4
Rack and Cabinet Requirements, on page 5
Clearance Requirements, on page 5
Preparing for Installation
1