Cisco UCS B200 M3 설치 매뉴얼 - 페이지 31

{카테고리_이름} Cisco UCS B200 M3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M3 34 페이지. Blade server
Cisco UCS B200 M3에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (36 페이지), 설치 및 서비스 참고 사항 (37 페이지), 매뉴얼 (8 페이지), 업그레이드 매뉴얼 (21 페이지), 설치 및 서비스 참고 사항 (28 페이지)

Procedure

Step 1

Enable Quiet Mode in the BIOS policy of the server's Service Profile.

Step 2

Establish a direct connection to the server, either by connecting a keyboard, monitor, and mouse to the front panel using

a KVM dongle (N20-BKVM) or by other means.

Step 3

Reboot the server.

Step 4

Press F2 during reboot to enter the BIOS setup screens.

Step 5

On the Advanced tab, select Trusted Computing and press Enter.

Step 6

Set the TPM Support option to Enable.

Step 7

Press F10 to save and exit. Allow the server to finish booting.

Server Troubleshooting

For general troubleshooting information, see the see the

Cisco UCS blade servers are intended to be configured and managed using Cisco UCS Manager. For details, see the Configuration

Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL:

/www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html

Specification

Height

Width

Depth

Weight