Cisco UCS B200 M4 설치 및 서비스 참고 사항 - 페이지 13

{카테고리_이름} Cisco UCS B200 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M4 46 페이지. For e5-2600 v4 series cpus
Cisco UCS B200 M4에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (30 페이지), 업그레이드 매뉴얼 (9 페이지), 서비스 매뉴얼 (24 페이지)

페이지 인쇄

Overview

Secure Digital Cards

Secure Digital (SD) card slots are provided and one or two SD cards can be populated. If two SD cards are

populated, they can be used in a mirrored mode.

Do not mix different capacity cards in the same server.

Note

The SD cards can be used to store operating system boot images or other information. Once the server has

been removed from the chassis, you can access the SD card slots by rotating the latch up so that it does not

cover the slots. Remove or insert the SD cards as needed. Either or both slots may be used. Rotate the latch

down to cover the slots before installing the server in the chassis.

Figure 3: SD Card Slot Locations

Storage Module

The Cisco UCS B200 M4 blade server has an optional storage module that can be configured with SAS or

SATA hard drives or solid state disks (SSDs). Because the UCS B200 M4 can be used without disk drives,

Connector to blade server local console

connector

DB9 serial connector

VGA connection for a monitor

2-port USB connector for a mouse and keyboard

Cisco UCS B200 M4 Blade Server Installation and Service Note

Secure Digital Cards