Cisco UCS B200 M4 설치 및 서비스 참고 사항 - 페이지 16

{카테고리_이름} Cisco UCS B200 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M4 46 페이지. For e5-2600 v4 series cpus
Cisco UCS B200 M4에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (30 페이지), 업그레이드 매뉴얼 (9 페이지), 서비스 매뉴얼 (24 페이지)

페이지 인쇄

Installing a Half-width Blade Server

Procedure

Step 1

Grasp the front of the blade server and place your other hand under the blade to support it.

Figure 4: Positioning a Blade Server in the Chassis

Step 2

Open the ejector lever in the front of the blade server.

Step 3

Gently slide the blade into the opening until you cannot push it any farther.

Step 4

Press the ejector lever so that it catches the edge of the chassis and presses the blade server all the way in.

Step 5

Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers only

is unlikely to lead to stripped or damaged captive screws.

Step 6

Power on the server. UCS Manager automatically reacknowledges, reassociates, and recommissions the server,

provided any hardware changes are allowed by the service profile.

Cisco UCS B200 M4 Blade Server Installation and Service Note

Installing a Blade Server