Cisco UCS B200 M4 설치 및 서비스 참고 사항 - 페이지 42

{카테고리_이름} Cisco UCS B200 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M4 46 페이지. For e5-2600 v4 series cpus
Cisco UCS B200 M4에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (30 페이지), 업그레이드 매뉴얼 (9 페이지), 서비스 매뉴얼 (24 페이지)

페이지 인쇄

Enabling the Trusted Platform Module

The following figure shows a GPU installed in a B200 M4 blade server.

Figure 22: Installed nVidia M6 GPU

Enabling the Trusted Platform Module

The Trusted Platform Module (TPM) is a component that can securely store artifacts used to authenticate the

server. These artifacts can include passwords, certificates, or encryption keys. A TPM can also be used to

store platform measurements that help ensure that the platform remains trustworthy. Authentication (ensuring

that the platform can prove that it is what it claims to be) and attestation (a process helping to prove that a

platform is trustworthy and has not been breached) are necessary steps to ensure safer computing in all

environments. It is a requirement for the Intel Trusted Execution Technology (TXT) security feature, which

must be enabled in the BIOS settings for a server equipped with a TPM.

Note

TPM installation is supported after-factory. However, a TPM installs with a one-way screw and cannot

be replaced or moved to another server. If a server with a TPM is returned, the replacement server must

be ordered with a new TPM.

Procedure

Step 1

Install the TPM hardware.

a) Power off, decommission, and remove the blade server from the chassis.

b) Remove the blade server cover.

Cisco UCS B200 M4 Blade Server Installation and Service Note

Front of server

Custom standoff screw

Servicing a Blade Server