Cisco UCS B420 M3 설치 및 서비스 참고 사항 - 페이지 18

{카테고리_이름} Cisco UCS B420 M3에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B420 M3 38 페이지. High performance blade server
Cisco UCS B420 M3에 대해서도 마찬가지입니다: 업그레이드 매뉴얼 (8 페이지)

페이지 인쇄

Procedure

Step 1

To install a CPU in an empty socket, remove the protective cap that is intended to prevent bent or touched contact pins.

The pick and pull cap tool provided can be used in a manner similar to a pair of tweezers. Grasp the protective cap and

pivot as shown.

Figure 12: Protective Cap Removal

Step 2

Release the catch on the pick and pull tool by pressing the handle/button.

Step 3

Remove the new CPU from the packaging, and load it into the pick and place tool as follows:

a) Confirm that the pedestal is set up correctly for your processor. The pedestal ships configured with the markings

"LGA2011-R1" facing upward, and this is the correct orientation.

b) Place the CPU on the pedestal. The CPU corners should fit snugly at the pedestal corners and the notches should meet

the pegs perfectly.

c) Place the CPU pick and place tool on the CPU pedestal aligned with the A1 arrow pointing to the A1 registration mark

on the pedestal.

d) Press the button/handle on the tool to grasp the CPU.