Cisco UCS B420 M4 설치 및 서비스 참고 사항 - 페이지 17

{카테고리_이름} Cisco UCS B420 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B420 M4 38 페이지. Blade server

Servicing the Blade Server

Step 10

Configure one or more of the following boot options for the boot policy and set their boot order:

• Local Devices boot—To boot from local devices, such as local disks on the server, virtual media, or

• SAN boot—To boot from an operating system image on the SAN, continue with Configuring a SAN

You can specify a primary and a secondary SAN boot. If the primary boot fails, the server attempts to boot

from the secondary.

• LAN boot—To boot from a centralized provisioning server, continue with Configuring a LAN Boot For

• iSCSI boot—To boot from an iSCSI LUN, continue with Creating an iSCSI Boot Policy in the

Air Baffles

The air baffles shown below ship with this server; they direct and improve air flow for the server components.

No tools are necessary to install them. Place them over the DIMMs and align them to the standoffs.

Caution

Be sure that the tabs on the baffles are set in the slots provided on the motherboard; otherwise, it may be

difficult to replace the server cover or damage to the motherboard might occur.

remote virtual disks, continue with Configuring a Local Disk Boot for a Boot Policy in the

Manager Server Management Guide

Boot for a Boot Policy in the

a Boot Policy in the

Cisco UCS Manager Server Management Guide

UCS Manager Server Management Guide

for your release.

Cisco UCS Manager Server Management Guide

for your release.

Cisco UCS B420 M4 Blade Server Installation and Service Note

Air Baffles

Cisco UCS

for your release.

Cisco