Cisco UCS B420 M4 설치 및 서비스 참고 사항 - 페이지 3
{카테고리_이름} Cisco UCS B420 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B420 M4 38 페이지. Blade server
페이지 인쇄
Overview
This chapter contains the following sections:
•
•
•
•
•
Cisco UCS B420 M4 High Performance Blade Server
This document describes how to install and service the Cisco UCS B420 M4 high performance blade server,
a full-width, high-density blade server that supports the following features:
• Up to four Intel Xeon E5-4600 v4 or v3 CPUs, interconnected with Intel QuickPath Interconnect (QPI)
• 48 DDR4 DIMMs, either RDIMMs, LRDIMMs, or TSV-RDIMMs.
• 3 mezzanine adapter slots.
• Up to 4 SAS or SATA hard disk drives (HDDs) or solid state drives (SSDs).
Up to four Cisco UCS B420 M4 blade servers can reside in a Cisco UCS 5108 Blade Server chassis.
Figure 1: Cisco UCS B420 M4 Blade Server Front Panel
1
2
Local Console Connection, on page 4
Secure Digital Cards, on page 4
Modular Storage Subsystem, on page 5
Drive Bay and RAID Controller Configurations, on page 5
links. Two- and four-CPU configurations are supported.
Hard drive bay 1
Hard drive bay 2
C H A P T E R
8
Power button and LED
9
Network link status LED
Cisco UCS B420 M4 Blade Server Installation and Service Note
1
1