Cisco UCS B460 M4 설치 및 서비스 참고 사항 - 페이지 33

{카테고리_이름} Cisco UCS B460 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B460 M4 46 페이지. Blade server
Cisco UCS B460 M4에 대해서도 마찬가지입니다: 데이터시트 (7 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (5 페이지), 설치 및 서비스 참고 사항 (50 페이지)

페이지 인쇄

Servicing the Blade Server

Installing Memory

To install a DIMM in the blade server, follow these steps:

Procedure

Step 1

Open the DIMM connector latches. See callout 1 in the following figure.

Step 2

Press the DIMM into its slot, evenly applying pressure on both ends until it clicks. See callout 2.

Step 3

Close the DIMM connector latches. See callout 3.

Figure 18: Installing a DIMM

Supported DIMMs

The DIMMs supported in this blade server are constantly being updated. A list of currently supported and

available DIMMs is in the specification sheets at:

http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html

Do not use any memory DIMMs other than those listed in the specification sheet. Doing so may irreparably

damage the server and require down time.

Memory Arrangement

Each UCS B260 M4 blade module has 48 slots for installing DIMMs—24 for each CPU. Each CPU has 24

DIMM slots spread over 8 channels. This blade server needs at least one DIMM attached to all populated

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs