Cisco UCS C220 M3 업그레이드 매뉴얼 - 페이지 7
{카테고리_이름} Cisco UCS C220 M3에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS C220 M3 10 페이지. Security manager 4.3
Cisco UCS C220 M3에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (29 페이지), 구성 매뉴얼 (33 페이지), 빠른 시작 매뉴얼 (12 페이지)
페이지 인쇄
The server and CPUs will now boot.
.
Downgrading Cisco UCS C-Series Servers From Intel
E5-2600/E5-2400 v2 Series CPUs
This downgrade procedure requires server downtime.
Note
This section contains the following topics:
•
•
Downgrade Scenario 1: UCSM-Managed Server
This scenario assumes the following conditions:
•
•
•
•
Use the following procedure to downgrade to earlier supported CPUs.
Power off the server.
Step 1
Replace the Intel E5-2600/E5-2400 v2 Series CPUs with the earlier supported CPUs.
Step 2
Use the CPU replacement procedures in the Installation and Service guide for your server:
C-Series Installation and Upgrade
Power on the server.
Step 3
Wait for Cisco UCS Manager to automatically discover and associate the server.
Step 4
Note
Optional: Downgrade your server CIMC.
Step 5
Use the CIMC firmware management procedures in the GUI or CLI
Configuration Guide
Optional: Downgrade your server BIOS.
Step 6
OL-28629-01
Downgrade Scenario 1: UCSM-Managed Server, page 7
Downgrade Scenario 2: Standalone Server, page 9
The C-Series server is managed by Cisco UCS Manager.
The Cisco UCS Manager software is already at the minimum version or later (see
Software and Firmware Requirements, page
The C-Series server is already at the BIOS/CIMC minimum version or later.
The C-Series server is using the Intel E5-2600/E5-2400 v2 Series CPUs.
The CIMC bundle, including the server CIMC and BIOS, is backward-compatible with earlier
supported CPUs, so the following firmware downgrade steps are optional.
for your release.
Cisco UCS C-Series Servers Upgrade Guide for Intel E5-2600 v2/E5-2400 v2 Series CPUs
Downgrading Cisco UCS C-Series Servers From Intel E5-2600/E5-2400 v2 Series CPUs
2).
Guides.
Minimum
Cisco UCS
Integrated Management Controller
7