Findeva FKL 150 설치 및 약식 운영 매뉴얼 - 페이지 3
{카테고리_이름} Findeva FKL 150에 대한 설치 및 약식 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Findeva FKL 150 5 페이지.
Findeva FKL 150에 대해서도 마찬가지입니다: 설치 및 약식 운영 매뉴얼 (20 페이지)
페이지 인쇄findeva AG
---------------------------------------------------
Operating conditions
Intermittent knockers can be used in dusty environments. The piston seals are suitable for oil-free operation.
Standard installation for Series FKL
1. The control system is the responsibility of the customer
In this case, intermittent control or (ON / OFF) is implemented by the customer by means of a 3/2-way normally
open air valve.
The control function may be performed by
- process control system
- time-lag relay
- switch (on/off)
Maximum distance between valve and FKL 8 m, diameter. 6 mm
2. Pneumatic intermittent control with a PTR (FKL 100 only)
The control function can be implemented by an enable signal
from the
-process control system
-time-lag relay
A
-or another signal
This system has a high impact frequency.
It is also possible to control several units.
FKL Operating Manual
09.08.2002