Cisco UCS C240 M3 구성 매뉴얼 - 페이지 16

{카테고리_이름} Cisco UCS C240 M3에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS C240 M3 33 페이지. Nebs server
Cisco UCS C240 M3에 대해서도 마찬가지입니다: 업그레이드 매뉴얼 (10 페이지), 서비스 참고 사항 (11 페이지)

페이지 인쇄

Step 5: Navigate to the Virtual Drive Info tab to see the virtual drives created. In this example, three virtual drives

have been created (RAID 0, 1, and 5).

Creating a Hot Spare

A hot spare is an additional, unused drive that is part of the disk subsystem. It is usually in standby mode, ready for

service if a drive fails. If a drive used in a RAID virtual drive fails, a hot spare automatically takes its place, and the

data on the failed drive is rebuilt on the hot spare. Hot spares can be used for RAID 1, 5, 6, 10, 50, and 60.

Two types of hot spares are used:

●

Global hot spares

●

Dedicated hot spares

Creating a Global Hot Spare

A global hot spare drive can be used to replace any failed drive in a redundant drive group, as long as its capacity

is equal to or larger than the capacity of the failed drive. A global hot spare defined on any channel should be

available to replace a failed drive on both channels.

Page 16 of 33