Digitus DN-82010-1 사용자 설명서 - 페이지 6
{카테고리_이름} Digitus DN-82010-1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitus DN-82010-1 6 페이지. 10/100base-tx fast ethernet media converter
Digitus DN-82010-1에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)
페이지 인쇄
3. Is the "Link action" LED illuminated on the fiber cable port?
NO
Check the fiber cables for proper connection.
Verify that the TX and RX cables are connected to the RX and TX
ports, respectively, on the 100Base-FX device.
YES
Proceed to step 4.
4. Is the "Speed" LED illuminated on a port with twisted-pair cable
installed?
NO
Check the copper cables for proper connection.
YES
OFF = The media converter has selected 10Mbps operation.
ON = The media converter has selected 100Mbps operation.
If the speed is not correct, disconnect and reconnect the twisted pair
cable to restart the initialization process.
Note: Connecting to Router, Bridge or Switch, please refer to the
device's Technical Manual.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive
2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested
by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living
environment. In this case, the user can be requested to undertake appropriate measures to
prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany