Epson GT-10000 제품 정보 매뉴얼 - 페이지 7
{카테고리_이름} Epson GT-10000에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson GT-10000 9 페이지. Product support bulletin(s)
Epson GT-10000에 대해서도 마찬가지입니다: 사양 (2 페이지), 제품 정보 매뉴얼 (8 페이지), 브로셔 및 사양 (2 페이지), 사용자 설명서 (8 페이지), 제품 지원 게시판 (12 페이지)
페이지 인쇄
EPSON GT-10000+
5. Click the
button. You see a preview of your scan in
Preview
the window that opens.
Auto
Locate
button
Auto
Exposure
button
Color
Adjustment
button
6. Choose your scan settings.
Click the
Auto Locate
the scan area around the edges of your image. You can also
adjust the scan area by positioning the mouse pointer over
the dotted line around the marquee's edge and dragging the
box to resize the marquee.
Click the
Color Adjustment
Balance Intensity feature if you need to remove color cast
from your image.
Click the
Auto Exposure
the highlight and shadow exposure.
Generally it's a good idea to use the Auto Exposure
button to obtain the best settings for your scan.
7. When you've finished making adjustments, click the
button.
The
light on the front of the scanner flickers while
READY
it's scanning. In a few moments, a scanned image is
imported into your host application's window. Then click
to close the EPSON TWAIN Pro or EPSON
Close
TWAIN Pro Network window and return to your
application.
6 - EPSON GT-10000+
button to automatically define
button and use the Gray
button to automatically set
Scan
Using a Network Scanner
Network scanning involves the following steps:
Connect the scanner to the scanner server.
Turn on the scanner and scanner server and start EPSON
Scan Server.
Place your first image on the document table (or in the
automatic document feeder).
From the client computer, start the host application, then
start EPSON TWAIN Pro Network to establish a
connection to the scanner server. Only one client computer
at a time can access the scanner server.
Choose the Image Type, Resolution, and other settings you
want for your scan.
Start the scan. Although this can be done from EPSON
TWAIN Pro Network on the client computer, it may be
more convenient to press the scanner's ] Start button or to
start the scan from the scanner server. Then you can scan
several images with a single trip to the scanner.
If you want to scan more than one image, place your second
image on the document table and press the scanner's
] Start button again. Repeat this step for every image you
want to scan. (The settings you chose for the first image
apply to these images too.)
When you return to the client computer, your scanned
images appear in the host application's window. Close
EPSON TWAIN Pro Network to end your connection to
the scanner server and allow other client computers to use
the scanner.
Some applications automatically close the client
computer's connection to the scanner server
when you press the
multiple images if you're using these applications.
Starting a Network Scan
You can start a scan on your network scanner in several ways:
You can start EPSON TWAIN Pro Network on the client
computer, make your scan settings, and click the
button on the EPSON TWAIN Pro Network main
window. The scanned image is imported into your host
application window.
You can press the ] Start button on the scanner to send the
scanned image to the client computer that is currently
connected to the scanner server.
3/01
]
Start button. You can't scan
Scan