Cisco 1700 series 구성 - 페이지 22

{카테고리_이름} Cisco 1700 series에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1700 series 34 페이지. Secure firewall management center
Cisco 1700 series에 대해서도 마찬가지입니다: 규정 준수 및 안전 정보 매뉴얼 (45 페이지), 매뉴얼 (15 페이지), 구성 매뉴얼 (25 페이지), 애플리케이션 노트 (41 페이지), 하드웨어 문제 해결 (12 페이지), 개요 매뉴얼 (13 페이지), 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (6 페이지), 하드웨어 설치 매뉴얼 (46 페이지)

페이지 인쇄
Cisco 1700 series 구성
Configuring Quality of Service Parameters
vbr-rt 320 320 30
no ilmi manage
oam-pvc 40
oam retry 3 5 1
encapsulation aal5snap
!
end
ATM per-VC Queuing and VC Bundling
Parameters can be applied to individual VCs either by using VC classes or by directly applying them to
the bundle members. Parameters applied to an individual VC supersede bundle-level parameters.
Parameters applied directly to a VC take precedence over the same parameters applied within a class to
the VC at the bundle-VC configuration level.
All of the QoS features are supported in per-virtual circuit (VC) and VC bundling mode. The default is
per-VC queuing mode.
VC bundling allows individual VCs going to the same destination to be grouped together. Traffic
mapping to each VC is based on traffic protocol criteria such as IP precedence. To enable VC bundling,
enter the bundle command under the ATM interface.
VC Bundling Configuration Example
The following example shows a VC bundling configuration:
vc-class atm atm-bundle
broadcast
oam-pvc manage 1
oam retry 3 3 1
encapsulation aal5snap
protocol ip inarp broadcast
oam-bundle manage 1
!
vc-class atm vip
vbr-rt 256 256 20
precedence 5-7
bump implicit
no protect vc
no protect group
!
vc-class atm high
vbr-rt 256 256 20
precedence 2-4
bump implicit
no protect vc
no protect group
!
vc-class atm normal
vbr-rt 256 256 20
precedence 0-1
bump explicit 2
no protect vc
no protect group
!
interface ATM0/0
description COLLEGAMENTO
no ip address
atm vc-per-vp 256
no atm ilmi-keepalive
Configuring an ADSL WAN Interface Card on Cisco 1700 Series Routers
22
OL-3317-03