Cisco 1700 series 하드웨어 설치 매뉴얼 - 페이지 8

{카테고리_이름} Cisco 1700 series에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1700 series 46 페이지. Secure firewall management center
Cisco 1700 series에 대해서도 마찬가지입니다: 규정 준수 및 안전 정보 매뉴얼 (45 페이지), 매뉴얼 (15 페이지), 구성 매뉴얼 (25 페이지), 애플리케이션 노트 (41 페이지), 하드웨어 문제 해결 (12 페이지), 개요 매뉴얼 (13 페이지), 구성 (34 페이지), 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (6 페이지)

Package Contents

The following figure shows the package contents for the 1700, 2700, and 4700. Note that the contents are

subject to change and your exact contents might contain additional or fewer items.

Figure 2: Package Contents

The serial number (SN) for the 1700, 2700, and 4700 is printed on the pullout asset card located on the front

panel as shown in the following figure of the 1700.

Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide

Use only SFPs have been qualified for use on the management center. Although non-Cisco

Note

SFPs and other Cisco SFPs are allowed, we do not recommend using them because they

have not been tested and validated by Cisco. Cisco TAC may refuse support for any

interoperability problems that result from using an untested SFP transceiver.

Chassis

Cisco rail kit (Cisco part number 800-43376-02)

Cisco Secure Management Center 1700, 2700,

and 4700

This document contains URLs that point to the

product overview, hardware installation guide,

regulatory compliance and safety information

guide, warranty, and licensing pages, and a QR

code that points to the management center

Documentation Portal.

RJ-45 to DP9-RS232 console cable (Cisco part

number 72-3383-XX)

RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six

feet long (Cisco part number 72-1482-XX)

Two 10-Gb SFP+ transceivers with cables

supported for all models or 25-Gb SFP+

transceivers with cables supported for the 4700

Optional for all models; in package if ordered.

Overview