Cisco 2600 Series 설치 매뉴얼 - 페이지 20

{카테고리_이름} Cisco 2600 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2600 Series 22 페이지. Configuring adsl wic to support pppoe clients
Cisco 2600 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 릴리스 정보 (32 페이지), 구성 (15 페이지), 애플리케이션 노트 (41 페이지), 데이터시트 (6 페이지), 부록 (15 페이지), 개요 (13 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (5 페이지)

페이지 인쇄
Cisco 2600 Series 설치 매뉴얼
Connecting to a Network

Connecting to a WAN

Table 3-2
information about connecting and configuring WAN and voice cards, refer to the online document Cisco
WAN Interface Cards Hardware Installation Guide, available online at Cisco.com and the
Documentation CD-ROM that came with your router.

Connecting the Console Terminal and Modem

Your router includes asynchronous serial console and auxiliary ports. These ports provide administrative
access to your router either locally (with a console terminal) or remotely (with a modem).
Cisco provides cables and adapters to connect your router to a PC or modem. These will include:
or

Identifying a Rollover Cable

Use a rollover cable to connect to the asynchronous serial console and auxiliary ports. You can identify
a rollover cable by comparing the two modular ends of the cable. Holding the cables side-by-side, with
the tab at the back, the wire connected to the pin on the outside of the left plug should be the same color
as the wire connected to the pin on the outside of the right plug. (See
Figure 3-26 Identifying a Rollover Cable
Cisco 2600 Series Routers Hardware Installation Guide
3-20
summarizes the WAN and voice connections for the Cisco 2600 series routers. For more
One RJ-45 console cable (Blue)
–
One RJ-45 auxiliary cable (Black)
–
One RJ-45-to-DB-9 adapter (Labeled TERMINAL)
–
–
One RJ-45-to-DB-25 adapter (Labeled MODEM)
–
One RJ-45-to-DB-9 adapter cable (Blue)
–
One RJ-45-to-DB-25 adapter cable (Black)
Pin 1
Pin 1 and pin 8
should be the
same color
Pin 8
Chapter 3
Installing the Router
Figure
3-26.)
OL-2171-02