Cisco 2621 사용자 설명서 - 페이지 11

{카테고리_이름} Cisco 2621에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2621 35 페이지. Gateway-pbx interoperability: lucent/avaya definity g3si with e1 pri net5 signaling
Cisco 2621에 대해서도 마찬가지입니다: 운영 (25 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄
Cisco 2621 사용자 설명서
Non-FIPS Approved Algorithms
The following algorithms are not FIPS approved and should be disabled:
•
•
•
•
•
Protocols
The following network services affect the security data items and must not be configured: NTP,
TACACS+, RADIUS, Kerberos.
SNMP v3 over a secure IPSec tunnel may be employed for authenticated, secure SNMP gets and sets.
Since SNMP v2C uses community strings for authentication, only gets are allowed under SNMP v2C.

Remote Access

Auxiliary terminal services must be disabled, except for the console. The following configuration
disables login services on the auxiliary console line.
line aux 0
no exec
Telnet access to the module is only allowed via a secure IPSec tunnel between the remote system and
the module. The Crypto officer must configure the module so that any remote connections via telnet are
secured through IPSec.

Obtaining Documentation

The following sections provide sources for obtaining documentation from Cisco Systems.

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at the following sites:
•
•
•
78-13824-01
RSA for encryption
MD-4 and MD-5 for signing
ah-sha-hmac
esp-sha-hmac
HMAC SHA-1
http://www.cisco.com
http://www-china.cisco.com
http://www-europe.cisco.com
Cisco 2621 Modular Access Router Security Policy
Obtaining Documentation
11