Cisco 2800 Series 구성 - 페이지 12

{카테고리_이름} Cisco 2800 Series에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2800 Series 32 페이지. Cisco ios software configuration
Cisco 2800 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 데이터시트 (8 페이지), 빠른 시작 매뉴얼 (47 페이지), 애플리케이션 노트 (41 페이지), 빠른 시작 매뉴얼 (45 페이지), 구성 (10 페이지), 개요 (27 페이지), 데이터시트 (5 페이지), 데이터시트 (20 페이지)

How to Configure Radio Settings on an Access Point

Command or Action

Step 4

dfs band frequency-group block

Example:

Router(config-if)# dfs band 1 2 block

Step 5

end

Example:

Router(config-if)# end

Step 6

show controllers dot11Radio interface

Example:

Router# show controllers dot11Radio 0/0/1

Step 7

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuring Radio Settings on an Access Point

Purpose

Prevents an access point from selecting a specific group of

frequencies during DFS.

•

The frequency-group value can be 1, 2, 3, or 4:

–

1 specifies frequencies 5.150 to 5.250 GHz.

–

2 specifies frequencies 5.250 to 5.350 GHz.

–

3 specifies frequencies 5.470 to 5.725 GHz.

4 specifies frequencies 5.725 to 5.825 GHz.

–

At least one group of frequencies must be specified.

•

Multiple groups are allowed.

Returns to privileged EXEC mode.

(Optional) Displays radio controller status.

The Current Frequency line of the output displays the

•

status of DFS, for example:

Current Frequency: 5300 MHz Channel 60 (DFS

enabled)

(Optional) Saves your entries in the configuration file.