Cisco 3700 series 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 3700 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3700 series 12 페이지. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Cisco 3700 series에 대해서도 마찬가지입니다: 설치 및 포맷 (34 페이지), 업그레이드 지침 (30 페이지), 데이터시트 (8 페이지), 애플리케이션 노트 (41 페이지)

페이지 인쇄
Cisco 3700 series 설치 매뉴얼
Chapter 1
Overview of Cisco 3700 Series Routers

Power Supply Options

Table 1-3
configuration specified when you placed your order, your router may not support all of these options.
Table 1-3
Power Supply Option
AC input power
DC input power
–48-V telephony power module to provide inline power to IP phones
Dual hot-swappable power supplies
Compatible with Cisco Redundant Power System
1. Because of increased power consumption in high-temperature environments, a fully loaded Cisco 3745 router requires both
Internal –48 V Telephony Power Modules
Cisco 3700 series routers provide inline power to IP phones connected to the router through Ethernet
switch network modules. This power is supplied by special –48 V modules that connect directly to the
chassis power supplies in Cisco 3725 and Cisco 3745 routers. A single –48 V power module meets the
power needs of up to 36 IP phones. A Cisco 3745 router with two –48 V power modules installed
provides redundant power for up to 36 IP phones.
modules as they appear when installed in Cisco 3700 series routers.
OL-2180-08
lists the power supply options supported by Cisco 3700 series routers. Depending on the
Power Supply Options for Cisco 3700 Series Routers
power supplies when ambient temperature exceeds 104˚F (40˚C). Cisco 3745 routers operating under these conditions do not
support the online replacement of power supplies.
Figure 1-5
and
Figure 1-6
Cisco 3700 Series Routers Hardware Installation Guide
Power Supply Options
Cisco 3725
Cisco 3745
Yes
Yes
Yes
Yes
Yes
Yes
1
No
Yes
Yes
Yes
show the –48 -V power
1-9