b4Adventure Slackers NINJA SWING LINE DELUXE 매뉴얼 - 페이지 5

{카테고리_이름} b4Adventure Slackers NINJA SWING LINE DELUXE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. b4Adventure Slackers NINJA SWING LINE DELUXE 8 페이지.

MANDATORY LOAD STRESS TEST

Step 1: Make sure all your connections are tight (see step 4)

Step 2: MANDATORY LOAD STRESS TEST YOUR LINE. Using either a 250 Lbs (113 Kg) weight or person, have

them test the NINJALINE™ by suspending the weight 5 ft. (1.5 m) from each end of the line.

RELEASING THE RATCHET

• To release the ratchet, pull up the vinyl coated gate inside the ratchet handle and open all the way until flat.

EXPECT A "POP"

• The second release gate should open, releasing the spool and the line tension should "pop" open with webbing

releasing (Figure 5).

• Continue to pull on the line until there is little tension left. Slide the remaining line out of the ratchet.

• Troubleshooting: If you ratchet too much of your line, you may experience difficulty releasing the line. Do your

best to lay the ratchet open and completely flat. If you cannot lay the ratchet flat, try pulling the gate and the spring

loaded piece on the opposite side of the gate at the same time, pulling in opposite directions (Figure 6). You may

need another person to help free the line while you hold the ratchet open. If this does not work, try leaving the

ratchet all the way open for several hours (overnight if possible), sometimes gravity and the weight of the ratchet

will allow the line to release naturally. If still experiencing difficulty removing your line from the ratchet, please call

customer service at 1-844-834-4334.

Figure 5

Figure 6

b4Adventure • Denver Colorado 80216 • 1-844-834-4334 • [email protected]