Cisco ASR 9000 Series 빠른 참조 매뉴얼 - 페이지 5

{카테고리_이름} Cisco ASR 9000 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 9000 Series 7 페이지. Line card
Cisco ASR 9000 Series에 대해서도 마찬가지입니다: 네트워크 설정 구성 (26 페이지), 구성 매뉴얼 (46 페이지), 구성 매뉴얼 (50 페이지), 매뉴얼 (24 페이지), 구성 (46 페이지), 매뉴얼 (44 페이지)

페이지 인쇄

Cisco ASR 9000 Series

Line Card

Chassis Airflow

ESD

Compatible Modules

Replacement

Chassis Airflow

Provide unrestricted airflow by maintaining adequate clearance at both the inlet and exhaust openings of the chassis and the

power modules. For more details on chassis airflow clearance, click here.

Prevent any airflow obstruction that may be caused by cables or blocked filters. Manage and route the cables in ideal directions to

prevent such airflow obstructions.

ESD

While performing any function or replacement on the chassis, ensure that you use an ESD-preventive antistatic wrist strap

(or ankle strap) to avoid damage by static electricity.

Periodically, check the resistance value of the ESD-preventive strap. The measurement should be between 1 and 10 M Ohm.

For more details, click here.

Compatible Modules

Use only compatible versions of power modules and fan trays for operations. For the product datasheet, click here.

Replacement

Inspect air filters once every 3 months. If there is an increase in temperature, please check the air filters and fans for any

malfunctioning. For troubleshooting, reach out to Cisco TAC and isolate any possible hardware failure.

Replace air filters that are clogged or damaged. Cleaning the air filters is not recommended.

During maintenance, to avoid dust accumulation and air leakage that can increase the chassis temperature, do not keep the fan tray

slot empty for a long duration.

Maintenance Best Practices