Cisco AudioCodes MP-1288 매뉴얼 - 페이지 2

{카테고리_이름} Cisco AudioCodes MP-1288에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AudioCodes MP-1288 2 페이지.

Troubleshooting:

If the device does not come back or there are any issues, perform the following steps:

1. Verify the device MAC is correct in the Dashboard

2. Verify the device MAC has been assigned to a user/phone with a station assignment in the Dashboard

Factory Default Instructions:

For the MP-1288, use the following to process a factory reset of the device:

1. Using a paper Clip or any other similar pointed object, press and hold down the button for at least 10 seconds but no longer

than 30 seconds.

This will default the Device to factory settings.

WARNING: THIS PROCEDURE DESCRIBES HOW TO MANUALLY RECONFIGURE AN AUDIOCODES MP-1288 TO WORK ON

THE BROADSOFT BROADCLOUD PBX NETWORK. ONCE THIS PROCEDURE HAS BEEN COMPLETED, ANY PRIOR

CONFIGURATION ON THE DEVICE WILL BE OVERRIDDEN, INCLUDING THE ADMINISTRATOR PASSWORD, AND THE

DEVICE WILL ONLY BE USEABLE ON THE BROADSOFT BROADCLOUD PBX NETWORK. THE DEVICE MUST BE RETURNED

TO THE AUDIOCODES FACTORY DEFAULT CONFIGURATION BEFORE IT CAN BE USED ON ANY NETWORK OTHER THAN

BROADSOFT BROADCLOUD PBX.

BroadSoft BroadCloud PBX

23/07/18