Digitus professional DN-651108 사용자 설명서 - 페이지 6
{카테고리_이름} Digitus professional DN-651108에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitus professional DN-651108 7 페이지. Industrial 8-port gigabit switch
페이지 인쇄
Specification
IEEE Standard
Switch Architecture
Data Processing
Flow Control:
Jumbo Frame
MAC address Table Size
Packet Buffer Size
Network Connector:
Network Cable
Protocol
LED
Housing
Reserve polarity protection
Overload current protection
Power Supply
Power Consumption
Alarm Relay Contact
PoE power
Removable Terminal Block
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE802.3x Flow Control and Back Pressure,
Back-plane (Switching Fabric): 16Gbps
Store and Forward
IEEE 802.3x Flow Control and Back Pressure
9KB
8K
1M
8xRJ-45 10/100/1000BaseT(X) auto
negotiation, Auto MDI/MDI-X function,
Full/Half duplex
UTP/STP above Cat.5e Cable
EIA/TIA-568 10-ohm (100m)
CSMA/CD
PW1 (Power 1) Green,
PW2 (Power 2) Green,
RLY (relay) Amber,
TX/RJ-45 port:
LNK (Link/Active) Green,
Heavy Metal Housing
Present
Present
Redundant Dual DC 12V-56V
5W@48 VDC full load,
Relay outputs with current carrying capacity
of 1 A @24VDC,
Relay in short circuit mode when 1 power is
connected. in open circuit mode when two
power supply are connected
N/A
Provide 2 Redundant power, Alarm relay
contact, 6 Pin
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG): 12-24/14-22