Cisco DPC3925 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Cisco DPC3925에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco DPC3925 12 페이지. Docis 3.0 cable modem

페이지 인쇄
Cisco DPC3925 빠른 시작 매뉴얼

Back Panel Description

The following illustrations show the description and function of the back panel
The following illustrations show the description and function of the back panel components on the
The following illustrations show the description and function of the back panel components on the
components on the Cisco DPC3925 residential gateway.
Cisco DPC3925 residential gateway.
Cisco DPC3925 residential gateway.
Model DPC3925
1.
POWER
– Connects the residential gateway to the AC power adapter that
1.
POWER
– Connects the residential gateway to the AC power adapter that is provided with your
1.
POWER
– Connects the residential gateway to the AC power adapter that is provided with your
is provided with your residential gateway
residential gateway
residential gateway
CAUTION:
Avoid damage to your equipment. Only use the power supply
that is provided with your residential gateway.
The following illustrations show the description and function of the back panel components on the
2.
TELEPHONE 1 AND 2
Cisco DPC3925 residential gateway.
2.
TELEPHONE 1 AND 2
conventional telephones or fax machines
2.
TELEPHONE 1 AND 2
conventional telephones or fax machines
wiring to conventional telephones or fax machines
3.
ETHERNET
– Four RJ-45 Ethernet ports connect to the Ethernet port on your PC or your home
3.
ETHERNET
– Four RJ-45 Ethernet ports connect to the Ethernet port on your PC or your home
network
network
3.
ETHERNET
– Four RJ-45 Ethernet ports connect to the Ethernet port on
your PC or your home network
4.
CABLE
– F-connector connects to an active cable signal from your service provider
4.
CABLE
– F-connector connects to an active cable signal from your service provider
4.
CABLE
– F-connector connects to an active cable signal from your service
5.
WIRELESS SETUP
– Pressing this switch initiates wireless setup, this feature allows the user to
5.
WIRELESS SETUP
– Pressing this switch initiates wireless setup, this feature allows the user to
provider
add new Wireless Protected Setup (WPS) compliant wireless clients to the home network
add new Wireless Protected Setup (WPS) compliant wireless clients to the home network
5.
WIRELESS SETUP
feature allows the user to add new Wireless Protected Setup (WPS)
1.
POWER
– Connects the residential gateway to the AC power adapter that is provided with your
compliant wireless clients to the home network
residential gateway
CAUTION:
The Reset button is for maintenance purposes only. Do not use
6.
RESET
– A momentary pressing (1-2 seconds) of this switch reboots the EMTA. Pressing the
6.
RESET
– A momentary pressing (1-2 seconds) of this switch reboots the EMTA. Pressing the
unless instructed to do so by your cable or telephone service
switch for more than ten seconds first causes a reset-to-factory-default of all settings and then
switch for more than ten seconds first causes a reset-to-factory-default of all settings and then
2.
TELEPHONE 1 AND 2
provider. Doing so may cause you to lose any cable modem
reboots the gateway
reboots the gateway
conventional telephones or fax machines
settings you have selected.
3.
ETHERNET
– Four RJ-45 Ethernet ports connect to the Ethernet port on your PC or your home
6.
RESET
– A momentary pressing (1-2 seconds) of this switch reboots the
network
EMTA. Pressing the switch for more than ten seconds first causes a reset-
to-factory-default of all settings and then reboots the gateway
4.
CABLE
– F-connector connects to an active cable signal from your service provider
5.
WIRELESS SETUP
– Pressing this switch initiates wireless setup, this feature allows the user to
add new Wireless Protected Setup (WPS) compliant wireless clients to the home network
– RJ-11 telephone ports connect to home telephone wiring to
– RJ-11 telephone ports connect to home telephone wiring to
– RJ-11 telephone ports connect to home telephone
– Pressing this switch initiates wireless setup, this
– RJ-11 telephone ports connect to home telephone wiring to
Page 7 of 11
Page 7 of 11