Epson Perfection 3200 Series 제품 정보 - 페이지 3

{카테고리_이름} Epson Perfection 3200 Series에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Perfection 3200 Series 6 페이지. Product support bulletin(s)
Epson Perfection 3200 Series에 대해서도 마찬가지입니다: 제품 지원 게시판 (11 페이지), 제품 지원 게시판 (12 페이지)

페이지 인쇄

Using the Transparency Unit

To use the transparency unit, remove the reflective document

mat by grasping the top of the mat and sliding it up gently, as

shown.

remove mat

by sliding it up

Make sure the cable for the tranparency unit is plugged into the

round connector. If not, turn off the scanner, then connect the

cable as shown. You may need to raise the scanner cover and

twist the cable to insert it.

make sure that

the arrow faces

Using Film Holders

Film has two sides, a shiny base side and a dull emulsion side.

The base side of the film has the film maker's name and film ID

numbers printed on it. Place the shiny base side down.

To scan 35-mm film strips, 4 × 5-inch film, or 120/220 (6 × 9-

cm) film, place the film in the correct holder:

transparency unit

Place the holder with the film onto the scanner. Make sure the

white triangle on the holder points to the upper-right corner of

the scanner's document table.

11/02

EPSON Perfection 3200 Series

35-mm strips

EPSON Perfection 3200 Series - 3

4 × 5-inch and

120/220 (6 × 9-cm)

film