Digitus professional DN-82123 사용자 설명서 - 페이지 4
{카테고리_이름} Digitus professional DN-82123에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitus professional DN-82123 4 페이지. Gigabit fiber ethernet converter
페이지 인쇄Technical parameters:
1.
Standard Protocol:
IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX/FX standard
IEEE 802.3z 1000Base-TX/FX standard
2.
Connector: one UTP RJ-45 connector, one SC/ST/SFP connector
3.
Operation mode: full duplex mode or half duplex mode
4.
Environmental temperature: 0°C-60°C
5.
Relative humidity: 5%-90%
6.
TP cable: Cat5 UTP cable
7.
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode: 8.3/125, 8.7/125, 9/125 or 10/125μm
8.
Max. 2M buffer memory built in chip
9.
Automatic identification of MDI/MDI-X cross line
10.
High-performance 1.4Gbps memory bandwidth.
Cautions:
1. This product is suitable for indoor application.
2. Put on the dust cover of fiber interface when not used.
3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
4. Single optical fiber transceiver must be used in pair (See the attachment description in
delivery). Example: DN-82122 and DN-82123
Trouble shooting:
1. Device is not matched. Please select the corresponding network device according to the
transfer rate of the product (10Mbps or 100Mbps) when connected to other network
devices (network card, hub, switch).
2. Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in and fiber
soldering welding, and excessive intermediate nodes may cause excessive loss rate or
abnormal operation.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping
content. If the Declaration of Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany