Digitus professional DN-952 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Digitus professional DN-952에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitus professional DN-952 3 페이지. Gigabit poe+ at splitter, 10/100/1000 mbps, 24w
페이지 인쇄Description
The DIGITUS PoE Splitter provide data and power via a single Ethernet Cable to
devices, which are not supporting Power over Ethernet. Just connect the input of the
Splitter to a PoE Switch or a PoE Injector and the output side to a non-PoE network
device such as an access point, IP Phone or a Camera to provide Power and Data. The
Extender is self-powered by PoE, so there is no additional power supply needed. The
output voltage can be regulated via a dip switch to 5V, 9V or 12V. So this Splitter
expand your network where you wish to place network device where are no power
outlets available.
Specifications
Item
Ports
Network Media
Pass Through Data Rates
Power Output
Input Power Requirements
Indicators
Connectors
Dimensions
Environmental Conditions
Regulatory Compliance
Electromagnetic
Description
1 10/100/1000M RJ45 PoE Port (DATA + POWER IN)
1 10/100/1000M RJ45 LAN Port (Only DATA)
1 DC Jack (DC OUT)
10Mbps: Cat 3,4,5 Unshielded Cable
100Mbps: Cat 5,5E Unshielded Cable
1000Mbps: Cat 5E, 6 Unshielded Cable
10/100/1000 Mbps
Adjustable 5VDC/2A, or 9VDC/2A or 12VDC/2A
DC Input Voltage: 36 to 57 Vac
PoE ready / in-use
Shielded RJ-45, EIA 568A and 568B
80x54x24mm
Operating Ambient Temperature: 0 to 40℃
Operating Humidity:
Maximum 90%, Non-condensing
Storage Temperature: -20 to 70℃
Storage Humidity:
Maximum 95%, Non-condensing
IEEE 802.3at (PoE Plus)
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
RoHS Compliant, CE, FCC
FCC Part15, Class B