Cisco Expressway CE500 설치 매뉴얼 - 페이지 3

{카테고리_이름} Cisco Expressway CE500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Expressway CE500 16 페이지.

페이지 인쇄

Introduction

About this document

This document describes how to install a Cisco Expressway CE500 appliance into your video network. It

contains information on:

Preparing the installation

Installing the hardware

Performing initial configuration

Troubleshooting the installation

The Cisco Expressway appliance is based on the UCS C220 M3L. For more detailed information on installing

this appliance see

Cisco UCS C220 Server Installation and Service

About the Cisco Expressway appliance

The Cisco Expressway appliance described in this document is a CE500, which is based on a UCS C220

M3L.

The appliance supports Cisco Expressway version X8.1.1 or later. Note that the CE500 model does not

support the scalability solution introduced in the X8.1 release.

The following table lists the components for the appliance:

Item

Chassis

Processor

RAM

Hard Disk

Onboard SAS Controller

NIC

PSU

TPM

Miscellaneous

The only field replaceable component is the PSU.

Note: the hard disks must not be removed.

To initiate a Return Material Authorization (RMA) go to

info/or3/o32/Return_a_Product/WebReturns/product_Online_web_returns.html.

Cisco Expressway CE500 Appliance Installation Guide (X8.5)

Part

UCSC-C220-M3L

UCS-CPU-E5-2643 (3.30 GHz / 4 Core - Hyper threaded)

UCS-MR-1X082RY-A (8 GB)

UCS-HDD1TI2F212 (1TB NL SAS Disk LFF)

SAS support provided by UCSC-RAID-ROM1

N2XX-ABPCI01-M3 (Broadcom 5709 Dual Port 1 Gb)

UCSC-PSU-650 W & Power cable

UCSX-TPM1-001 (Trusted Platform Module)

UCSC-BBLKD-L (HDD filler panel)

UCSC-HS-C220M3 (Heat Sink)

UCSC-RAIL1 (Rail Kit)

UCSC-PCIF-01H (Half height PCIe filler)

UCSC-PSU-BLKP (Power supply blanking panel/filler)

http://www.cisco.com/web/ordering/cs_

Guide.

Quantity

Page 3 of 16