Epson Perfection 4490 Photo 제품 정보 매뉴얼 - 페이지 5

{카테고리_이름} Epson Perfection 4490 Photo에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Perfection 4490 Photo 11 페이지. A4
Epson Perfection 4490 Photo에 대해서도 마찬가지입니다: 빠른 시작 (4 페이지), 브로셔 및 사양 (2 페이지), 사용자 설명서 (22 페이지), 사용자 설명서 (21 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

2. Open the scanner cover and gently slide up the document

mat to remove it. Also make sure the transparency unit

transportation lock is unlocked.

3. Use a soft cloth to wipe the transparency unit window and

the document table before placing your film or slides.

Transparency

unit window

To place film for scanning, see "Placing Film in the Holder"

below.

To place slides for scanning, see "Placing Slides in the Holder"

on page 6.

Placing Film in the Holder

Placing 35 mm Film Strips

1. Open the film strip cover(s) on the film holder.

2. Slide one or two film strips all the way into the film holder

with the shiny base side facing down. Your images and any

wording on the film strips should appear backwards on the

side that faces up.

Note: Hold the edge of the film gently or use gloves to touch the

film; otherwise you may damage the film.

Make sure the white stickers on the back of the film holder and

the areas around them are not scratched, dusty, or covered in

any way. If the areas are obscured, the scanner may have trouble

recognizing your film in Full Auto Mode.

Do not cover any of the tiny holes in the film holder or the

scanner may have trouble recognizing which film holder you are

using.

3. Close the covers over the film and press them down until

they click. Then press down on all the edges of the covers to

secure them.

4/05

Epson Perfection 4490 Photo

Epson Perfection 4490 Photo - 5