Cisco LINKSYS RFC 2364 빠른 설치 - 페이지 2

{카테고리_이름} Cisco LINKSYS RFC 2364에 대한 빠른 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco LINKSYS RFC 2364 6 페이지. Linksys adsl gateway
Cisco LINKSYS RFC 2364에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (6 페이지)

페이지 인쇄

Connection

1�

Make sure that all the devices that you are working with are powered down,

including your computer(s) and the Gateway.

Connect one end of the provided

phone cable to the wall jack with

ADSL service.

Connect the other end of the

phone cable to the DSL/Line port

on the back of the Gateway.

NOTE:

or splitter between the phone cable and wall jack. Contact your ISP

to determine if one is required. (UK residents need to connect the

microfilter to the wall phone jack with ADSL service and then connect

one end of the provided phone cable to the RJ-11 port on it.)

If you use ISDN, then you do not need a microfilter.

Connect one end of the provided

Ethernet cable to your computer's

Ethernet adapter. Connect the

other end of the Ethernet cable to

one of the Ethernet ports on the

back of the Gateway.

Repeat this process for every

computer that you want to connect

to the Gateway via Ethernet.

If you are connecting more than

four computers to the Gateway, you

will also need to connect a switch

to the Gateway.

NOTE:

Ethernet adapter's user guide for more information.

To avoid interference, you may need to place a microfilter

If your computer's Ethernet adapter is not set up, refer to the

Connect the Phone Cable

Connect the Ethernet Cable