Cisco Linksys WAG160N 사용자 설명서 - 페이지 5

{카테고리_이름} Cisco Linksys WAG160N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Linksys WAG160N 20 페이지. Wireless-n home adsl2+ modem router
Cisco Linksys WAG160N에 대해서도 마찬가지입니다: 사용자 설명서 (33 페이지), 사용자 설명서 (22 페이지)

페이지 인쇄
Cisco Linksys WAG160N 사용자 설명서
Chapter 1
Horizontal Placement
The device has four rubber feet on its bottom panel. Place
the device on a level surface near an electrical outlet.
Wall-Mounting Placement
The device has two wall-mount slots on its bottom
panel. The distance between the slots is 152 mm
(6 inches).
Two screws are needed to mount the device.
Suggested Mounting Hardware
4-5 mm
1-1,5 mm
Note: Mounting hardware illustrations are not
†
true to scale.
NOTE:
The manufacturer is not responsible for
damages incurred by insecure wall-mounting
hardware.
Follow these instructions:
1.
Determine where you want to mount the device. Make
sure that the wall you use is smooth, flat, dry, and
sturdy. Also make sure the location is within reach of
an electrical outlet.
2.
Drill two holes into the wall. Make sure the holes are
152 mm (6 inches) apart.
3.
Insert a screw into each hole and leave 3 mm
(0,12 inches) of its head exposed.
4.
Maneuver the device so the wall-mount slots line up
with the two screws.
5.
Place the wall-mount slots over the screws and slide
the device down until the screws fit snugly into the
wall-mount slots.
152 mm
Wall Mounting Template
Product Overview
2